Frigidaire FFT7001-80B Dryer Parts

Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.

Dryer thermal limiter (or thermal fuse). May be located on the blower housing or element. If the dryer overheats, the thermal fuse blows to cut off power to the dryer. If the thermal fuse has blown, the dryer won't start. The thermal fuse cannot be reset--if the fuse has blown, it must be replaced

Dryer heating element and housing assembly. If the dryer does not heat check for a blown themal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.

Bearing cup for drum support ball

Air duct seal

Door strike

Main terminal block for power cord

Clip,top-to-front

Condenser coil cleaning brush

This vacuum cleaner attachment is useful for cleaning condenser coils and dryer venting systems.

Door catch kit

Grounding ball

Bracket bearing support

Screw, #8 pan head, 10-10b x 0.500, sq drive